See our new 142/242 Low Odor/Ultra Clear series!

Bait Plastics, LTD

Aluminum Fishing Lure Molds

Epic Bait Molds 2.5″ Ned Craw (Copy)

$160.00

The ned craw bait measures 2.5″ from tail to tip of claws.  Featuring 3D claws, short ned rig style body, 6 legs, and small antenna. 4 cavity

$140.00

The 4.6″ Freakin Frog is a top water frog bait.  It’s legs kick/flop to create a small splash of water and a bubble trail as it is retrieved on a slow/moderate to fast retrieve.  The body of this bait is .85″ wide and .52″ thick.  The body also features a life-like profile with bumps down the […]

$135.00$235.00

The Classic Stickbait features a worm-like rib texture and a gently tapered tail. Designed for the wacky rig, texas rig, carolina rig and other bass fishing techniques. 5″ Classic Stickbait – 4 Cavity Mold size – 3″x6.125″ 8 Cavity Mold size – 6″x6.125″ Bait size – 5″ long x 0.393″ thick More sizes coming soon, email us at EpicBaitMolds@gmail.com if you […]

$185.00

This “fluke style” or “jerk bait” style bait measures 5 inches from nose to tail with a body width of .38″ and a mid body thickness of .6″.  The belly features a deep hook slot to allow great hookup ratios on ewg style hooks.  The back features a divot down the center for aligning and […]

$170.00

The 6.2 Inch Lizard bait has a total length of 6.2 inches with the curly tail extended. The body of this bait is .35″ from back to belly and .46″ from side to side at the widest part.  This bait also features curly tail arms that kick at a very slow retrieval rate along with a long […]

$190.00

The 3″ slick swimmer paddle tail swimbait’s  body is just under .5″ thick and .375″ wide. The bait has a big side to side tail wobble with body roll at slow speeds and ultra fast, hard kicking action at higher speeds. This is a 6 cavity “top shot” mold which allows you to use two injectors […]

$145.00

The 5 Inch Flappin Drax bait has a total length of 5 inches, body width of .8″ (including ribs), and body thickness of .46″ (including ribs).  There are a total of 10 ribs along the body and the last two near the tail of the bait are recessed (slightly indented) to accommodate the hook point. The bait is also […]

$140.00

The 6 Inch Finesse Worm is 6 inches total length with a diameter of .33″ at the thickest part of the body.  The bottom of the bait is flat in overall shape but the ribbing on the body goes all the way around the worm. Mold size – 3″x7″ Number of cavities – 5 All molds are […]

Quality supplier for all Soft Bait Making products.

Bait Plastics offers soft bait supplies for the DIY lure maker.  We ship Plastisol, Pigments, Glitters, Scents, and a full range of Plastisol additives.

Aluminum Fishing Lure Molds

Epic Bait Molds 7″ Curly Tail Grub

$119.99

This 7 Inch ribbed Curly Tail Grub’s body thickness is .65″, the body length from nose to base of tail is 2.45″ and the curly tail is .07″ thick. The total length of this bait with its tail extended is 7 inches. 2 Cavity  

All

3D Eyes

$11.99

3D Eyes - 100 PACK Adhesive Backed

  • Red
  • Gold
  • Silver

$210.99

  3 Litres of  Plastisol

  • Choose Formula
5 Pigments Choices  {4 Ounces Each} 5 Colour Choices of .040 Hex High Temp Glitter  {4 Ounces Each} 25 Bait Bags {Pick Size} Choose Scent

Liquid Pigments

Premium Pigments

$9.99$189.73

  • Tequila Sunrise
  • Red Shad
  • Limetreuse EX
  • Chartreuse EX
  • Monkey Milk
  • Turbo Pink
  • Turbo Green
  • Turbo Orange
  • Turbo Purpl
  • June Bug EX

$352.47

Pump Warranty Information: Customers using solvents such as stabilization resins (MinWax™, Gator Venom™ etc.), alcohol and other polar solvents must use the vacuum pumps in conjunction with a cold trap for evacuations in excess of 5 minutes. (Excludes Cactus Juice™)

  • If the consumer is using the pump for prolonged periods of time exceeding 5 minutes we require that a cold trap is used or the pump warranty is void.
  • These stabilization resins have the ability to break down the internal components of the pump that are plastic resulting in a seized motor voiding all warranties.
  • When evacuation exceeds 5 minutes these solvents begin to vaporize and then re-condense in the vacuum pump reservoir. Once enough solvent re-condenses in the pump displacing the oil the plastic internal components may begin to warp, melt or seize. The use of a cold trap will condense the vapors prior to making their way to the vacuum pump preventing pump damage due to excessive use. Furthermore, Minwax Wood Hardener™ is not to be used with any vacuum pumps, EVER. (A seized motor will result from the first use.)
  • To prevent these issues from happening to your process, change the Oil after each vacuum pump use, Even if the use time is only 5min.
 

Sale!

Safety Products

Spice Spoon

$7.99

  • Stainless Steel
  • Set of four
  • Smidgen
  • Dash
  • Pinch
  • Tad

$145.00

The 5 Inch Flappin Drax bait has a total length of 5 inches, body width of .8″ (including ribs), and body thickness of .46″ (including ribs).  There are a total of 10 ribs along the body and the last two near the tail of the bait are recessed (slightly indented) to accommodate the hook point. The bait is also […]

Plastisol Additives

UV Dipping Dye

$6.95

4 Ounce Dipping Dye with UV. Instantly change your baits color  

  • UV Clear
  • Green
  • Chartreuse
  • Orange
  • Red

New

Safety Products

Pyrex Microwave Cup

$11.95

16 ounce {2 CUPS} PYREX Microwave Cup for heating plastisol in a microwave.

Hand Injectors

N2 Injectors

$144.99$594.99

Hand Injectors with Locking Pins. 6oz Injector 8oz Injector  10oz Injector  Dual 6oz injector Dual 8oz injector Dual 10oz injector Dual Injector Kit Triple 6oz Injector Triple 8oz Injector Triple 10oz Injector Triple Injector Kit Comes with 2 O-Rings  

$12.99

The Next Level 6210 is a premium CVC crew neck. This relaxed-fit short-sleeve t-shirt is fabric laundered 60/40 combed ringspun cotton/polyester made of 32 singles with a set-in 1x1 baby rib collar and tear away label. Material: Cotton, Cotton Blend, Fleece, Jersey, Polyester, Rayon

We love the opportunity to speak with our customers and can be reached

at  csr@baitplastics.co.uk

Wanting to learn more about Bait Plastics formulas and making your own soft baits.  Click here for helpful tips! 

Feature Products

Scent

Scents

$9.99$177.99

The best scents on the market.  Add these scents to the finished baits or bag to attract your trophy fish!

  • Anise
  • Cappuccino
  • Crawfish Oil
  • Garlic
  • Herring

Plastisol Additives

UV Dipping Dye

$6.95

4 Ounce Dipping Dye with UV. Instantly change your baits color  

  • UV Clear
  • Green
  • Chartreuse
  • Orange
  • Red

$4.95$19.99

Hanging Bait Bags - Laminated 3 x 3 4 x 4 5 x 3 6 x 4 7 x 4.25 8 x 5 9 x 4 12 x 4

Lorem ipsum dolor sit amet, consectetur adipiscing elit. Ut elit tellus, luctus nec ullamcorper mattis, pulvinar dapibus leo.

WE WILL BE CLOSED FROM 19/12/2024 - 06/01/2025 ALL ORDERS WILL BE PICKED UP ON THE 06101/2025