No products in the cart.
The 2 Inch Curly Tail Grub bait is just under 2 inches from nose to tip of tail with the tail extended. It features a ribbed body that has a thickness of .25″ and length of .85″. The tail is thin and very “curled” to create a very flowing back/forth twisting motion while on the fall, slow retrieve or fast retrieve. This mold has 16 cavities total and can be laminated with the use of a dual or triple injector (not included).
This bait is best rigged on smaller jig heads from 1/32-1/16oz.
16 cavity mold dimensions – 4″x6″
All molds are made in the USA from 6061 Aluminum
| Weight | 2 lbs |
|---|---|
| Dimensions | 7 × 3 × 1,5 in |
Related products
Aluminum Fishing Lure Molds
£159,06
It’s 4″ with the legs not extended and 5″ with them extended. 6 Cavity
Aluminum Fishing Lure Molds
£135,20
The 9 Inch Pintail Worm is 9 inches total length with a diameter of .35″ at the thickest part of the body that tapers down to .125″ in diameter at the tip of the tail. The taper of the bait starts behind the egg sack area to leave the front of the bait thick where the hook […]
Out of stock
Aluminum Fishing Lure Molds
£139,18
5.25 Inch Wacky Stick 7 Cavity Body tapers to the tail to .125 thick
Aluminum Fishing Lure Molds
£178,95
The 4″ long Slick Swimmer paddle tail swimbait’s body is .6″ thick and .375″ wide. This is a 6 cavity “top shot” mold which allows you to use two injectors and a mixing block (not included) to shoot top/bottom laminated baits.
Aluminum Fishing Lure Molds
£115,32
At a full 18″ the Mega Ribbon is the one of the biggest (if not THE biggest) Ribbon Tail injection worm mold on the market! Featuring a 1/2″ diameter ribbed body, smooth section, and .08″ thick tail. The ribbed body / smooth area is 7.5″ long and the tail is 10.5″ long making for a grand total of […]
Out of stock
