No products in the cart.
Compress Air System is used for 6″, 8″, and 10″ Aluminum Bait Plastics Molds.
Aluminum Twin Rails – 24″ L x 4″W x 1/2″ H; Heavy Duty Construction
Air Cylinder
2.8″L x 2.4″W x 3.4″ H’ 50mm Stroke
Double Action. Double Piston Rod-external diameter:” 20mm/0.79″
Inlet/Out thread diameter:12.5mm/1/2″
Working pressure range: 30-116psi, recommended 100psi
Warning do not exceed 160psi
Easy maintenance cylinder needs no lubrication
Regulator Valve- regulated adjustment 0-140psi, corrosive resistant. Includes air hose fitting.
Control Lever 5way,2 position air hand lever operated valve. Pneumatic solenoid valve, manual control; push-pull.
Overall: Pneumatic system is extremely reliable 2nd durable.
Regulator Valve – Inlet/outlet port is marked to show directional air flow to adjust airflow: 1) hold the spin button and pull, 2)turn the rotary button to adjust the pressure 3) The valve can be checked by the pressure gauge 4) Press the button to lock the pressure.
| Weight | 36 lbs |
|---|---|
| Dimensions | 24 × 4 × 1 in |
Related products
Out of stock
Air Clamp/Vise
$437.50
Recommended air pressure 110 to 140PSI. If possible, use an air inline filter to extend the cylinder life. Always check your compressor for moisture. Keep molds centered to get the best out of this clamp. Do not leave plugged in with pressure when not in use. Usage of the clamp can pinch hand, finger or ect. Using this clamp the operator/owner of the clamp takes full responsibility of usage of the device. Clean with compressed air. Do not use chemicals or abrasives. (wd40 safe for cleaning) Do not exceed 140 psi. Servicing. Add very little Tool oil once every month. (About 4 drops is all you need to lube the system.) (Do not use WD40 in the air lines.)
